Petek panel

The aluminum honeycomb panel adopts hot pressing technology. The honeycomb panel has light weight, yüksek güç, stable structure and good wind pressure resistance. The weight of the same honeycomb sandwich panel is only 1/5 of the aluminum panel and 1/10 of the steel plate. Due to the high heat conduction value between the aluminum skin and the honeycomb, the thermal expansion and cold contraction of the inner and outer aluminum skin are synchronized; There are small holes on the honeycomb aluminum skin, so that the gas in the plate can flow freely; The sliding mounting buckle system will not cause structural deformation during thermal expansion and cold contraction. The panel mainly uses high-quality 3003H24 alloy aluminum plate or 5052AH14 high manganese alloy aluminum plate as the base material. The panel thickness is 0.8~1.5mm fluorocarbon roller coating plate or color light resistant baking paint. The color light resistant baking paint is stronger than PVDF in terms of scratch resistance, acid rain corrosion discoloration resistance and self-cleaning. The thickness of the bottom plate is 0.6~1.0mm, and the total thickness is 25mm.